High-Grade Gold at Siona
Released
Released
Announcement PDF
ASX Announcement
11 December 2024
High-Grade Gold Intercepted in RC Drilling at Siona
•
Further assay results from the initial follow-up RC program across the emerging
Siona Gold Discovery have been received. Eleven RC holes have been
completed across Siona for 2,250m of drilling, testing approximately 500m of
strike.
•
24IWBRC0050, located approximately 80m along strike of 24IWBRC0044 returned
an intercept of:
o
17m*1 @ 4.9g/t Au from 85m (estimated true width of 8-10m), including
1m*1 @ 61.9 g/t Au from 85m, within a higher-grade intercept of
6m*1 @ 12.8g/t Au from 85m.
•
Higher-grade results demonstrate potential for zones of high-grade mineralisation
within both broad lower-grade mineralisation across Siona.
•
24IWBRC0048 drilled 50m south of 24IWBRC0044 returned an intercept of:
o
23m*1 @ 1.3 g/t Au from 102m (estimated true width of 12-18m), including:
•
15m*1 @ 1.6 g/t Au from 105m,
24IWBRC0049 completed down-dip of 24IWBRC0044 returned an intercept of:
o
43m*1 @ 0.4g/t Au from 93m (estimated true width of 18-24m),
•
Visible gold was observed in RC chips from intervals in both 24IWBRC0050 and
24IWBRC0051; see Figures 6 and 7.
•
Results demonstrate mineralisation continuity along more than 300m of strike,
with additional results expected from RC drilling completed to the southeast of
24IWBRC0039 in the coming weeks.
•
RC drilling has been paused for 2024 due to inclement weather impacting road
conditions and will re-commence in early 2025
•
RC drilling in early 2025 will continue to test structural targets and regolith
anomalies proximal to Siona along the eastern margin of the New England
Granite to understand the broader mineralisation potential across the large-scale
target area.
*1 All intercept lengths are reported as down-hole lengths as the true width is uncertain; an
estimate of true width is provided for the primary Siona intercepts.
Contact Us
A: Level 1 Unit 5/62 Ord Street,
West Perth WA 6005
T: +61 (0)8 9389 9021
E: yandal@yandalresources.com.au
yandalresources.com.au | ASX:YRL
Board and Management
Chris Oorschot
Managing Director/CEO
Greg Evans
Non-Exec Chair
Katina Law
Non-Exec Director
Tim Kennedy
Non-Exec Director
Greg Fitzgerald
Company Secretary
For further information or to ask questions in relation to this announcement, please visit
our Investor Hub at https://investorhub.yandalresources.com.au/link/8r6G1P
Commenting on the new results and observations, Yandal Resources’ Managing Director,
Mr. Chris Oorschot, said: “Siona infill RC drilling continues to demonstrate mineralisation
continuity along strike and has extended mineralisation beyond the extent of discovery
holes 24IWBRC0039 and 24IWBRC0044. Mineralisation is now confirmed along more than
300m of strike.
It is also encouraging to see higher-grade intercepts across Siona, which are supported by
the observation of visible gold. Given the structural nature of the orogenic gold systems,
higher-grade zones are likely, and to see evidence of such at this early stage is an excellent
result.
Heavy rainfalls across the project area have resulted in a pause in current RC drilling.
However, this will give the Exploration Team time to consolidate results and prepare for
drilling to re-commence in early 2025. The Exploration Team is looking forward to continue
testing structural and geochemical targets proximal to Siona in the new year.”
Yandal Resources Ltd (ASX: YRL, “Yandal Resources” or the “Company”) is pleased to advise that
it has received the additional assay results from the initial follow-up RC program at the Siona Gold
Discovery hosted within the New England Granite that commenced earlier in November. Eleven
RC holes were drilled as part of the initial follow-up RC drilling program for a total of 2,250m (See
Figure 1).
The New England Granite (NEG) target area (within E 53/1843) is part of the broader Ironstone
Well–Barwidgee (IWB) Gold Project (see Figure 9), located approximately 45km north of Northern
Star’s (ASX: NST) Bronzewing mining complex and 75km south of the Jundee mining centre (ASX:
NST), within the Yandal Greenstone Belt.
Results confirm that Siona mineralisation is sub-vertical, dipping variably to the northeast or
southwest along the northwest strike and parallel to the granodiorite-basalt contact. These results
have also confirmed mineralisation continuity along the strike to the northwest, between the
discovery holes 24IWBRC0039 and 24IWBRC0044 and extended mineralisation further to the
northwest. The current round of results also includes some higher-grade intercepts from
24IWBRC0050. These higher-grade results demonstrate the potential for zones of high-grade
mineralisation within a broader lower-grade envelope.
While the follow-up RC program has been expanded, recent heavy rainfall across the Wiluna
and Leinster region and forecast rainfall has resulted in the Company pausing the current drilling
program to allow roads to recover and access for heavy vehicles to be re-established. RC drilling,
along with diamond drilling, will restart in January 2025.
yandalresources.com.au | ASX:YRL
2
Figure 1: Plan view over the emerging Siona discovery area displaying all drilling and drill traces. Previous RAB
and AC drilling collars are colour-coded by max Au (g/t) in the hole. A simple projection of the granodiorite-basalt
contact is shown in dashed magenta. Underlying the plan is a composite aerial magnetic image (total magnetic
intensity and reduce-to-pole first vertical derivative).
yandalresources.com.au | ASX:YRL
3
Section A
SW
NE
Surface
Transported
Cover
BOT
6m @ 2.5 g/t Au
Incl. 2m @ 7.0 g/t Au
Basalt
Granitoid
TOFR
24IWBRC0050
17m @ 4.9 g/t Au
Incl. 1m @ 61.9 g/t Au
within 6m @ 12.8 g/t Au
2m @ 9.2 g/t Au
Incl. 1m @ 18.1 g/t Au
New England
Granite
Basalt
Figure 2: Cross section A, across Siona, showing mineralisation intercepted in 24IWBRC0050, including 17m @ 4.9
g/t Au from 85m down-hole to bottom of the hole. The mineralisation is open downhole, down dip and along strike.
See Figures 1 and 6 for the location of the section in the plan. The section shows all drilling +/-25m away from the
section plane.
yandalresources.com.au | ASX:YRL
4
Section B
SW
NE
Surface
Transported
Cover
BOT
24IWBRC0044
14m @ 1.8 g/t Au
Incl. 3m @ 4.9g/t Au
& 1m @ 5.9g/t Au
24IWBRC0049
43m @ 0.4 g/t Au
Basalt
New England
Granite
Figure 3: Cross section B, across Siona, showing mineralisation intercepted in 24IWBRC0049, including 43m
@ 0.4g/t Au from 93m down-hole, this intercept is reported using a lower cut-off grade of 0.1g/t Au. The
mineralisation is open downhole, down dip and along strike. See Figures 1 and 6 for the location of the section
in the plan. The section shows all drilling +/-25m away from the section plane.
yandalresources.com.au | ASX:YRL
5
Section C
SW
NE
Surface
Transported
Cover
BOT
24IWBRC0048
23m @ 1.3 g/t Au
Incl. 16m @ 1.6 g/t Au
TOFR
5m @ 0.9 g/t Au
Incl. 1m @ 2.9 g/t Au
Basalt
New England
Granite
Figure 4: Cross section C, across Siona, showing mineralisation intercepted in 24IWBRC0048, including
23m @ 1.3g/t Au from 102m down-hole. The mineralisation is open downhole, down dip and along strike.
See Figures 1 and 6 for the location of the section in the plan. The section shows all drilling +/-25m away
from the section plane.
yandalresources.com.au | ASX:YRL
6
Section D
SW
NE
Surface
Transported
Cover
BOT
TOFR
2m @ 1.3 g/t Au
Visible gold observed in quartz
veining between 64-65m
2m @ 3.9 g/t Au
Incl. 1m @ 6.8 g/t Au
New England
Granite
Basalt
Figure 5: Cross section D, across Siona, showing RC drilling results from 24IWBRC0051. See Figures
1 and 6 for the location of the section in the plan. The section shows all drilling +/-25m away from the
section plane.
yandalresources.com.au | ASX:YRL
7
24IWBRC00XX – Assays received
24IWBRC00XX – Assays pending
24IWBRC00XX – EIS Diamond Drilling
24IWBRC0034A
24IWBRC0035
New England
Granite
Emerging Siona
Gold Discovery
Figure 1
24IWBRC0036
24IWBRC0043
24IWBRC0042
24YRLEIS0001
24IWBRC0041
24IWBRC0040
E 53/1843
Figure 6: A Collar plan for the broader New England Granite area displaying all drilling collars, colourcoded by max Au in hole (g/t Au), overlying a simplified interpretation of bedrock geology. Note
interpreted northwest trending structures internal to the New England Granite. The inset labelled Figure
1 shows the extent of the Siona collar plan illustrated in Figure 1.
yandalresources.com.au | ASX:YRL
8
Siona RC Drilling Results
*1 All intercept lengths are reported as down-hole lengths as the true width is
uncertain. An estimate of true width is provided for primary Siona intercepts.
RC hole 24IWBRC0050 returned the highest-grade intercept from across the emerging Siona
gold discovery to date (see Figure 2) with an intercept of:
o
17m*1 @ 4.9g/t Au from 85m (estimated true width of 8-12m), including
1m*1 @ 61.9 g/t Au from 85m, within a higher-grade interval of
6m*1 @ 12.8g/t Au from 85m.
The above intercept occurred within moderately to weakly weathered sheared
granodiorite. High grades are confirmed by the observation of visible gold within several RC
intervals. Visible gold was observed in several RC intervals that only returned lower-grade fire
assay Au results (see Figure 7); duplicate samples from these intervals have been submitted
for screen fire analysis. In addition to the above, 24IWRC0050 also yielded several narrower
high-grade intervals, including:
o
3m*1 @ 4.8g/t Au from 63m (estimated true width of 2-3m), including
o
2m*1 @ 7.0 g/t Au from 63m.
2m*1 @ 9.2g/t Au from 170m (estimated true width of 1-2m), including
1m*1 @ 18.0 g/t Au from 170m.
Of note within 24IWBRC0050 is the presence of high-grade mineralisation (2m*1 @ 9.2g/t Au
from 170m) within a broad granitic dyke that is interpreted to intrude parallel to the Siona
trend. The dyke now presents a potential host for additional mineralisation adjacent to Siona.
Results from 24IWBRC0050 extend known mineralisation 70m to the northwest of
24IWBRC0044, which intercepted 14m @ 1.8g/t from 63m (See ASX release 21 October 2024).
24IWBRC0049 demonstrated a steep north-east dipping contact and returned a broad
intercept below 24IWBRC0044 (See Figure 3) of:
o
43m*1 @ 0.4g/t Au from 93m (estimated true width of 18-24m).
yandalresources.com.au | ASX:YRL
9
24IWBRC0048 located approximately 50m south of 24IWBRC0044, returned a significant
intercept of:
o
23m*1 @ 1.3 g/t Au from 102m (estimated true width of 12-18m), including:
15m*1 @ 1.6 g/t Au from 105m,
The results from 24IWBRC0048 and 24IWBRC0049 confirm northwest-trending mineralisation
continuity between the initial discovery holes of 24IWBRC0039 and 24IWBRC0044 (See ASX
release 21 October 2024).
24IWBRC0051, located 70m northwest of 24IWBRC0050 returned several narrow intercepts of:
o
2m*1 @ 0.9g/t Au from 63m (estimated true width of 1-2m), and
o
2m*1 @ 3.9g/t Au from 114m (estimated true width of 1-2m), including
1m*1 @ 6.8 g/t Au from 114m.
It should be noted that visible gold was observed within 24IWBRC0051 between RC intervals
64-65m (See Figure 8). Additional samples have been submitted for screen-fire analysis from
both 24IWBRC0050 and 24IWBRC0051.
Current results confirm mineralisation continuity over >300m of strike parallel to the northwesttrending structural granodiorite-basalt contact.
Significant interceptions are shown in Figures 1 to 5 and listed in Tables 2 and 3 at the end of
this release. All intercept lengths are reported as down-hole lengths as the true width is
uncertain. An estimate of true width is provided for primary Siona intercepts.
yandalresources.com.au | ASX:YRL
10
Figure 7: Visible gold evident within and adjacent to an oxidised quartz vein fragment from
the 99-100m interval in 24IWBRC0050. The same interval returned an initial 50g fire assay
result of 1.7 g/t Au. Additional samples have been submitted for screen-fire analysis.
yandalresources.com.au | ASX:YRL
11
Figure 8: Visible gold evident within an oxidised quartz vein fragment from the 64-65m
interval in 24IWBRC0051. The same interval returned an initial 50g fire assay result of 0.6
g/t Au. Additional samples have been submitted for screen-fire analysis.
yandalresources.com.au | ASX:YRL
12
Next Steps
Further results from the RC drilling program are expected over the coming weeks, and results
from the remaining four RC holes drilled as part of the initial follow-up RC program are
anticipated before the end of the year.
Recent heavy rainfall across the Wiluna and Leinster region has impacted access to the
Ironstone Well-Barwidgee Gold Project. Due to access limitations, which inhibit fuel delivery
to the project, and additional forecast rainfall, RC drilling has been paused until early
January 2025.
The exploration team has expanded the current follow-up RC drilling program at Siona and
commenced preparation for diamond drilling, which is scheduled to begin in January 2025.
RC drilling in early 2025 will continue to test structural targets and regolith anomalies proximal
to Siona along the eastern margin of the New England Granite. This drilling program aims to
test positions with similarities to Siona and to understand the broader mineralisation potential
across the New England Granite target area.
In addition to the above, the exploration team will commence collecting geochemical data
to aid in characterising and targeting mineralisation. The planning of several geophysical
investigations, including more detailed ground gravity and passive seismic, is also underway.
AC Results
With the prioritisation of RC drilling samples from Siona, the analysis of AC samples from the
recently completed air-core program across the Caladan and Irulan target areas has been
delayed. Measures, including the diverting of air-core samples to a second lab, have been
enacted to speed up the delivery of results. It is anticipated that all results will be received
by early January 2025.
yandalresources.com.au | ASX:YRL
13
Figure 9: A simplified geology plan across the IWB Gold Project shows active prospects and
exploration target areas, including the New England Granite Prospect to the southeast.
yandalresources.com.au | ASX:YRL
14
Looking Ahead
The Company has a very active end of CY 2024 and start of CY2025 scheduled with
exploration activities and news flow, including;
1.
Further results from the follow-up RC drilling across Siona will continue to be received
over the coming weeks;
2.
Air-core drilling results from across the Caladan and Irulan target areas are anticipated
in 4 weeks;
3.
Diamond drilling at Siona is scheduled to commence in January 2025;
4.
RC drilling will re-commence across the New England Granite in January 2025;
5.
Results from the second phase of soil sampling covering the broader Caladan target
have been received and will be released once processing and interpretation are
complete.
Authorised by the board of Yandal Resources
For further information, please contact:
Chris Oorschot
Managing Director
Yandal Resources Limited
yandal@yandalresources.com.au
yandalresources.com.au | ASX:YRL
Greg Fitzgerald
Company Secretary
+61 8 9389 9021
yandal@yandalresources.com.au
15
About Yandal Resources Limited
Yandal Resources has a portfolio of advanced gold exploration projects in the highly prospective Yandal
and Norseman-Wiluna Greenstone Belts of Western Australia.
Yandal Resources’ gold project locations.
Table 1 – Yandal Resources Ltd - Mineral Resource Summary
Indicated
Inferred
Deposit
Tonnes Grade
Au
Tonnes
Grade
Au
(‘000s)
(g/t)
(oz)
(‘000)
(g/t)
(oz)
Ironstone Well
Flushing Meadows1
2,141
1.3
91,000
5,245
1.1
177,000
Mt McClure
Challenger2
718
1.9
44,000
Success3
1,255
1.9
75,000
4
Parmelia
252
2.1
17,000
5
HMS Sulphur
1010
1.2
39,000
Gilmore6
134
1.7
7,200
Sub-total - MMC
3,369
1.7
182,200
Gordons
Gordons Dam7
365
1.7
20,000
8
2,141
Grand-total
1.3
91,000
8,979
1.3
379,200
Total
Tonnes
(000’s)
Grade
(g/t)
Au
(Oz)
7,386
1.1
268,000
718
1.9
44,000
1,255
1.9
75,000
252
2.1
17,000
1010
1.2
39,000
134
1.7
7,200
3,369
1.7
182,200
365
1.7
20,000
11,120
1.4
470,200
Due to the effects of rounding, totals may not represent the sum of the individual components.
1. Reported above 0.5g/t Au lower cut-off grade; refer to Yandal Resources Ltd ASX announcement dated 4 November 2020 for full
details. 2. Reported above 1.0g/t Au lower cut-off grade; refer to Yandal Resources Ltd ASX announcement dated 22 August 2022 for full
details 3. Reported above 1.0g/t Au lower cut-off grade; refer to Yandal Resources Ltd ASX announcement dated 6 September 2022 for
full details.4. Reported above 1.0g/t Au lower cut-off grade; refer to Yandal Resources Ltd ASX announcement dated 20 September 2022
for full details 5. Reported above 0.5g/t Au lower cut-off grade within this announcement 6. Reported above 1.0g/t Au lower cut-off
grade within this announcement 7. Reported above 1.0g/t Au lower cut-off grade; refer to Yandal Resources Ltd ASX announcement
dated 6 April 2023 for full details 8. All Resources are reported as global estimates, not constrained by optimised pit shells.
yandalresources.com.au | ASX:YRL
16
Competent Person Statement
The information in this document related to Exploration Targets and Exploration Results, geology and data
compilation is based on information reviewed or compiled by Mr Christopher Oorschot, a Competent
Person who is a Member of The Australasian Institute Geoscientists. Mr Oorschot is the Managing Director
of the Company, is a full-time employee and holds shares and options in the Company. Mr Oorschot has
sufficient experience which is relevant to the style of mineralisation and type of deposit under consideration
and to the activity which he is undertaking to qualify as a Competent Person as defined in the 2012 Edition
of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves’. Mr
Oorschot consents to the inclusion in this announcement of the matters based on this information in the
form and context in which it appears.
The information in this announcement that relates to the Flushing Meadows, Mt McClure and Gordons Dam
Mineral Resource Estimates is based on information compiled and generated by Andrew Bewsher, an
employee of BM Geological Services Pty Ltd (“BMGS”). Both Andrew Bewsher and BMGS hold shares in
the company. BMGS consents to the inclusion, form and context of the relevant information herein as
derived from the original resource reports. Mr Bewsher has sufficient experience relevant to the style of
mineralisation and type of deposit under consideration and to the activity which is being undertaken to
qualify as a Competent Person as defined in the 2012 Edition of the JORC ‘Australasian Code for Reporting
of Exploration Results, Mineral Resources and Ore Reserves’.
YRL confirms that it is not aware of any new information or data that materially affects the information
included in the original market announcement. The company confirms that the form and context in which
the Competent Person’s findings are presented have not been materially modified from the original market
announcement.
Forward Looking Statements
This document may contain certain forward-looking statements. Forward-looking statements include, but
are not limited to, statements concerning Yandal Resources Limited’s (Yandal’s) current expectations,
estimates and projections about the industry in which Yandal operates, and beliefs and assumptions
regarding Yandal’s future performance. When used in this document, words such as “anticipate”, “could”,
“plan”, “estimate”, “expects”, “seeks”, “intends”, “may”, “potential”, “should”, and similar expressions are
forward-looking statements. Although Yandal believes that its expectations reflected in these forwardlooking statements are reasonable, such statements are subject to known and unknown risks, uncertainties
and other factors, some of which are beyond the control of Yandal and no assurance can be given that
actual results will be consistent with these forward-looking statements. Drilling results presented indicate
geological potential for mineralisation but there can be no certainty that these results will eventually form
part of a Mineral Resource Estimate.
yandalresources.com.au | ASX:YRL
17
Table 2 – New England Granite RC collar location summary for this release. Please note that assays
for holes with collar IDs that are not in bold font have not yet been received. Please note that the
final survey of recently completed RC collars by DGPS has been completed, and the below final
coordinates will differ from those published in previous announcements.
Prospect
Hole ID
Hole
type
East
Siona
24IWBRC0048
RC
Siona
24IWBRC0049
RC
Siona
24IWBRC0050
Siona
24IWBRC0051
(m)
North
RL
(m)
(mAHD)
295593.5
7013647.4
295630.5
7013749.3
RC
295522.0
7013744.0
RC
295541.7
7013852.2
Azimuth
Dip
Total
Depth
(degrees)
(degrees)
502.2
46.9
-59.9
180
502.8
226.9
-69.3
185
502.1
46.0
-60.8
191
502.2
225.0
-60.0
131
(m)
Siona
24IWBRC0052
RC
295427.6
7013804.6
501.6
45.5
-60.0
305
`Siona
24IWBRC0053
RC
295591.1
7013852.0
502.8
224.5
-59.6
197
Siona
24IWBRC0054
RC
295818.9
7013635.2
503.5
225.0
-70.0
353
Siona
24IWBRC0055
RC
295867.8
7013557.2
504.9
227.66
-60.3
262
Table 3 – New England Granite - Summary of significant RC drilling assay results >0.3g/t Au with no more
than 2m of continuous internal waste included unless otherwise stated. All intercept lengths are reported
as down-hole lengths, and an estimate of true width is provided for Siona intercepts.
Hole
ID
Sample
type /
Sub
From
(m)
To
(m)
Interval
(m)
Au
(g/t)
Comment
1m RC
52
54
2
0.7
Oxidised rock
24IWBRC0048
1m RC
102
125
23
1.3
Transitional
24IWBRC0048
Including
105
120
15
1.6
Transitional
24IWBRC0048
1m RC
130
135
5
0.9
Fresh rock
24IWBRC0049
1m RC
93
136
43
0.4
Transitional to 100m, then fresh rock, a
>0.1 g/t Au lower cut-off grade applied.
24IWBRC0050
1m RC
48
49
1
2.2
Transitional
24IWBRC0050
24IWBRC0048
1m RC
60
66
6
2.5
Transitional
24IWBRC0050
Including
63
65
2
7
Transitional
24IWBRC0050
1m RC
71
73
2
0.6
Transitional
24IWBRC0050
1m RC
80
82
2
0.5
Transitional
24IWBRC0050
1m RC
85
102
17
4.9
Transitional
Including
85
91
6
12.8
Transitional
85
86
1
61.9
Transitional
24IWBRC0050
24IWBRC0050
Including
24IWBRC0050
1m RC
112
113
1
2.3
Fresh rock
24IWBRC0050
1m RC
134
135
1
3.3
Fresh rock
24IWBRC0050
1m RC
152
156
4
0.5
Fresh rock
24IWBRC0050
1m RC
170
172
2
9.2
Fresh rock
24IWBRC0050
Including
170
171
1
18
Fresh rock
24IWBRC0051
1m RC
32
33
1
0.5
Oxidised rock
24IWBRC0051
1m RC
50
51
1
0.5
Transitional
24IWBRC0051
1m RC
63
65
2
0.9
Transitional
24IWBRC0051
1m RC
114
116
2
3.9
Fresh Rock
Including
114
115
1
6.8
Fresh Rock
24IWBRC0051
yandalresources.com.au | ASX:YRL
18
Appendix 1 – Ironstone Well-Barwidgee Gold Project, New England Granite Prospect
JORC Code (2012) Table 1, Sections 1 and 2
Mr Christopher Oorschot, Managing Director of Yandal Resources, compiled the information in Section 1 and Section 2 of the following JORC Table 1 and
is the Competent Person for those sections. The following Table and Sections are provided to ensure compliance with the JORC Code (2012 edition)
requirements for the reporting of Exploration Results.
Section 1 Sampling Techniques and Data
Criteria
JORC Code explanation
Commentary
Sampling
techniques
Nature and quality of sampling (e.g. cut channels, random
chips, or specific specialised industry standard
measurement tools appropriate to the minerals under
investigation, such as down hole gamma sondes, or
handheld XRF instruments, etc.). These examples should
not be taken as limiting the broad meaning of sampling.
•
•
•
•
Include reference to measures taken to ensure sample
representivity and the appropriate calibration of any
measurement tools or systems used.
•
•
Aspects of the determination of mineralisation that are
Material to the Public Report. In cases where ‘industry
standard’ work has been done this would be relatively
ASX Announcement 11 December 2024
•
Yandal Resources has completed RC drilling across several structural targets within the New
England Granite Prospect, including Siona. The drilling involved 5.5-inch face sampling bit
down to an average down-hole depth of 222m (between 126m to 353m. Hole were drilled at
an angle of -60° to -70° either to the southwest or directly west. Groundwater was encountered
during the process of drilling; however, water volumes were well managed, and did not impact
sample quality.
Yandal Resources (YRL) RC drilling samples were collected via a rig-mounted static cone
splitter, splitting approximately 12.5% of the total sample volume. Two splits are collected for
each metre: a primary and duplicate sample. The primary 1m samples are then sent to a lab
for further analysis. The duplicate samples are retained on-site unless they are submitted as
routine duplicates.
For historical RC drilling, sampling practices by previous operators are assumed to be industry
standard at that time. Sampling procedures would be comparable to those applied by Yandal
Resources as per the above but with variations in the type of splitter used, etc.
A majority of historic RAB, air-core and RC drilling data is derived from open file WAMEX reports,
A068334, A071954. These results have been previously disclosed in the Company Prospectus.
For YRL RC drilling, the cone splitter is regularly cleaned and inspected. The 1m bulk samples
are laid out in drill order. These bulk samples are regularly inspected for contamination, and
the volume of the bulk sample is monitored. These bulk samples are retained until all results are
received and may be used to collect additional field duplicates to verify lab results, logged
geology or any other form of analysis. If the bulk sample appears visually low in volume or
weight, this is recorded with the sample details. The same applies to damp or wet samples.
Two splits are collected for each drilled metre: a primary and a secondary sample. The
Secondary sample is retained on-site and may be used to collect additional field duplicates
to verify lab results, logged geology or any other form of analysis
For all results, RC drilling was used to obtain 1m samples from which a portion, between 1-5kg
in weight, was crushed and pulverised to produce a 50g charge for fire assay with an AAS
(atomic absorption spectroscopy) finish for gold determination with a 0.01ppm detection limit.
Page 19
Criteria
JORC Code explanation
Commentary
simple (e.g. ‘reverse circulation drilling was used to obtain
1 m samples from which 3 kg was pulverised to produce a
30 g charge for fire assay’). In other cases more
explanation may be required, such as where there is
coarse gold that has inherent sampling problems. Unusual
commodities or mineralisation types (e.g. submarine
nodules) may warrant disclosure of detailed information.
Drilling
techniques
Drill type (e.g. core, reverse circulation, open-hole
hammer, rotary air blast, auger, Bangka, sonic, etc) and
details (e.g. core diameter, triple or standard tube, depth
of diamond tails, face-sampling bit or other type, whether
core is oriented and if so, by what method, etc).
•
For YRL RC drilling, a 139mm diameter face sampling bit and hammer was used.
Drill sample
recovery
Method of recording and assessing core and chip sample
recoveries and results assessed.
•
For YRL holes, RC drilling recoveries are visually assessed by the supervising geologist, and any
low-volume or weight samples are recorded, along with any damp or wet samples. Drill depths
are routinely verified at the completion of each drill rod (every 6m). The cone splitter is checked
for each drill site to ensure it is completely upright and level. Sample collection from the splitter
by drilling off-siders is monitored for any inefficiencies. For deeper holes, larger drilling
equipment is used, with boosted air pressure, to ensure samples are recovered and
groundwater is controlled as much as reasonably possible.
Within the limited drilling completed, there appears to be no correlation between sample
recovery and sample grade.
Measures taken to maximise sample recovery and ensure
representative nature of the samples.
Whether a relationship exists between sample recovery
and grade and whether sample bias may have occurred
due to preferential loss/gain of fine/coarse material.
Logging
Whether core and chip samples have been geologically
and geotechnically logged to a level of detail to support
appropriate Mineral Resource estimation, mining studies
and metallurgical studies.
Whether logging is qualitative or quantitative in nature.
Core (or costean, channel, etc) photography.
•
•
•
•
ASX Announcement 11 December 2024
For YRL drilling, all RC holes have been logged in full by a qualified and experienced geologist.
RC chips and fines from each 1m interval drilled are inspected and logged for colour,
weathering, lithology, deformation, veining and sulphide species. All 1m samples are sieved
and retained in labelled and annotated chip trays. Chip trays are transported to Perth for longterm storage and are available for review. The quality of logging information is considered
sufficient to support Mineral Resource Estimation studies.
Historic geological logging is limited in detail but provides sufficient information regarding
lithology, weathering, and mineralisation. It is assumed that previous project operators used
industry standard logging procedures comparable to those used by YRL above.
Data captured through geological logging by a geologist is qualitative in nature.
Page 20
Criteria
Sub-sampling
tech
Share your feedback
Discover