RC Drilling Intercepts Shallow Gold at Siona
Released
Released
Announcement PDF
Contact Us
A: Suite 1, Level 3, 1138 Hay Street,
West Perth WA 6005
T: +61 (0)8 9389 9021
E: yandal@yandalresources.com.au
yandalresources.com.au | ASX:YRL
Board and Management
Chris Oorschot Managing Director/CEO
Greg Evans Non-Exec Chair
Katina Law Non-Exec Director
Chris Newman Non-Exec Director
Greg Fitzgerald Company Secretary
RC Drilling Intercepts Shallow Gold at Siona
Siona RC Drilling Results
• Assay results have been received from all nine shallow RC holes completed
southwest of the main Siona mineralised structure; significant Intercepts
include:
o 17m @ 1.3g/t Au from 37m in 26IWBRC0084 (ETW*1 15m), including
3m @ 5.0g/t Au from 42m,
o 13m @ 1.5g/t Au from 45m in 26IWBRC0074 (ETW*1 11m), including
2m @ 8.1g/t Au from 45m,
o 10m @ 0.9g/t Au from 36m in 26IWBRC0086(ETW*1 8m), including
1m @ 2.0g/t Au from 36m,
2m @ 3.2g/t Au from 40m
o 10m @ 0.9g/t Au from 58m in 26IWBRC0080 (ETW*1 9m), including
1m @ 3.7g/t Au from 67m, and
o 15m @ 0.5g/t Au from 48m in 26IWBRC0076 (ETW*1 13m).
• The RC holes were designed to test mineralisation below several shallow
high-grade intercepts west of the main mineralised structure identified in
previous YRL drilling.
• Results have demonstrated a coherent horizontal (flat) zone of gold
mineralisation within the upper regolith profile occurring broadly to the
southwest of the Primary Siona mineralisation.
• Further drilling is needed to assess if the mineralisation reflects a shallow
dipping primary structure.
ASX Announcement
13 July 2026
*1 ETW - Estimated True Width
For further information or to ask questions in response to this announcement, please
visit our Investor Hub at https://yandalresources.com.au/link/yV054r
yandalresources.com.au | ASX:YRL 2
Commenting on the Siona RC drilling results, Yandal Resources’ Managing
Director, Mr. Chris Oorschot, said: “Our previous RC and diamond drilling across
the Siona gold discovery (in late 2024 and early 2025) included a number of
mineralised intervals that were either outside of, or presenting a different
geometry relative to the main Siona mineralised trend. These nine shallow RC
holes were focussed on a possible trend situated to the southwest of the main
mineralised structure.
The results show an almost horizontal zone of gold mineralisation that includes
some discrete higher-grade intervals. The shallow nature and consistent
geometry are very encouraging and will certainly add to the Mineral Resource
potential of the Siona Prospect. Given the oxide nature of these intercepts,
further drilling is needed to determine if these intercepts are associated with a
primary mineralised structure.”
Yandal Resources Ltd (ASX: YRL, “Yandal Resources” or the “Company”) is pleased to
provide an exploration update for the Siona Prospect, part of the New England Granite
(NEG) target area within the Ironstone Well-Barwidgee Gold Project (see Figures 4 and
5).
The small RC drilling program at Siona was designed to test several shallow high-grade
intercepts from previous RC drilling across the late 2024 gold discovery (see ASX releases
21 May 2025, 15 April 2025, 11 December 2024, and 25 November 2024). Assays from all
nine RC holes have been received, with numerous significant intercepts indicating the
presence of a shallow flat dipping plane of mineralisation situated to the south-west of
the main Siona mineralised trend. Further drilling will be completed in 2H CY2026 to verify
if the mineralisation is associated with a primary mineralised structure or if it represents a
blanket of secondary mineralisation. Results will feed into an updated exploration target
for the Siona Prospect that will be published in Early August.
RC drilling to complete the small Salusa RC program will recommence in the coming
weeks. The broader air-core program at NEG is scheduled to commence once final
heritage approvals are received.
yandalresources.com.au | ASX:YRL 3
Figure 1: Siona cross-section showing mineralised intercepts from 26IWBRC0082, 26IWBRC0084
and 26IWBRC0086. The section location is shown in Figure 3. The section shows all drilling within
+/- 12.5m of the section plane.
yandalresources.com.au | ASX:YRL 4
Siona RC Drilling Results
The Siona RC Program was completed to follow-up on several previously reported Siona
intercepts that are situated outside of the main mineralised trend. A total of nine RC hole for
approximately 950m were drilled (see Figure 2). Results from all nine RC holes have been received
(see Tables 2 and 3). Significant intercepts from the RC drilling include:
• 17m @ 1.3g/t Au from 37m in 26IWBRC0084 (ETW*1 15m), including
3m @ 5.0g/t Au from 42m,
• 13m @ 1.5g/t Au from 45m in 26IWBRC0074 (ETW*1 11m), including
2m @ 8.1g/t Au from 45m,
• 10m @ 0.9g/t Au from 36m in 26IWBRC0086(ETW*1 8m), including
1m @ 2.0g/t Au from 36m,
2m @ 3.2g/t Au from 40m
• 10m @ 0.9g/t Au from 58m in 26IWBRC0080 (ETW*1 9m), including
1m @ 3.7g/t Au from 67m,
• 15m @ 0.5g/t Au from 48m in 26IWBRC0076 (ETW*1 13m)
• 2m @ 1.5g/t Au from 33m in 26IWBRC0088, and
• 1m @ 3.3g/t Au from 37m in 26IWBRC0082
Figure 1 demonstrates the flat lying nature of the mineralisation in cross section, that appears to
be gently dipping (-10º) to the northwest. The mineralisation intercepted currently sits to the
southwest of the currently defined Siona mineralisation.
The strongly weathered and oxidised nature of the intercepts currently makes it difficult to
determine if the mineralisation is linked to a primary mineralised structure or if it represents a
blanket of secondary mineralisation within the regolith profile (supergene gold).
Further RC drilling will be scheduled for the second half of 2026 to determine if the mineralisation
represents primary mineralisation and if the flat dipping gold mineralisation continues over the
main Siona mineralised trend.
yandalresources.com.au | ASX:YRL 5
Figure 2: Siona collar plan overlaid on a ground gravity image (BA267 1VD linear colour scale, with
northeast shading). All Yandal drilling is plotted. Collars are thematically coloured by max Au (g/t) in the
hole. The section lines for cross-section A (Figure 1) are also displayed. See Figure 3 for the location of
Siona within the NEG target area.
26IWBRC0074
13m @ 1.5g/t Au
Incl. 2m @ 8.1g/t Au
Surface Projection of
Previously Defined Main
Siona Mineralised
Structure
200m
26IWBRC0084
17m @ 1.3g/t Au
Incl. 3m @ 5.0g/t Au
26IWBRC0086
10m @ 0.9g/t Au
Incl. 1m @ 2.0g/t Au
& 2m @ 3.2g/t Au
26IWBRC0080
10m @ 0.9g/t Au
Incl. 1m @ 3.7g/t Au
26IWBRC0076
15m @ 0.5g/t Au
yandalresources.com.au | ASX:YRL 6
Figure 3: Plan showing processed infill ground gravity dataset (BA267 1VD northwest
shade linear colour scale) across the New England Granite area. The plan includes the
interpretation of the intrusive margin and a preliminary interpretation of structures
interacting with the intrusion. Broad structural targets include Salusa and NEG01-NEG04.
yandalresources.com.au | ASX:YRL 7
Next Steps and Looking Ahead
The active exploration programs across the IWB Gold Project are advancing well, and the
Company maintains a strong cash position to advance its busy exploration schedule into 2H CY
2026. The exploration schedule for the remainder of 2026 will be updated following a strategic
review in late July.
The notable near-term activities and news flow from exploration drilling programs include;
Arrakis Discovery
• RC drilling assay results targeting the southeast extension of the Arrakis structure;
• Additional assay results from targeted RC drilling to define the scale and
geometry of higher-grade mineralisation across the recent gold discovery;
• RC testing of parallel air-core anomalies will commence in July.
• Development of an exploration target for the Arrakis discovery is underway and
will be finalised in late July/early August.
Flushing Meadows (MRE 268koz @ 1.1g/t Au, see Table 1)
• Core samples from diamond holes 26IWBRC0098DA and 26IWBRC0099D are with
the lab and prioritised, with results expected in late July.
• Air-core drilling has commenced over the broader Flushing Meadows and
parallel Giedi Prime target area, with first results expected late July.
• A small program of follow-up RC drilling will commence at Flushing Meadows in
the coming week, looking to test below recently reported intercepts from RC
pre-collars in 26IWBRC0098DA and 26IWBRC0099D.
New England Granite Target Area
• Drilling of the high-grade target (6m @ 6.3g/t Au from 36m, including 2m @
18.2g/t from 36m) identified at the Salusa Prospect will recommence in July;
• Further air-core drilling across the western side of the New England Granite
target area will commence once final heritage clearance is received.
• Development of an exploration target for the Siona Prospect is underway and
will be finalised in late July/early August.
Authorised by the board of Yandal Resources
Chris Oorschot
Managing Director
Yandal Resources Limited
yandal@yandalresources.com.au
Lucas Robinson
Corporate Storytime
+61 408 228 889
lucas@corporatestorytime.com
yandalresources.com.au | ASX:YRL 8
About Yandal Resources Limited
Yandal Resources has a portfolio of advanced gold exploration projects in the highly prospective Yandal
and Norseman-Wiluna Greenstone Belts of Western Australia.
Ironstone Well-Barwidgee Gold Project
The 100% owned Ironstone Well-Barwidgee (IWB) Gold Project covers approximately 370km² of highly
prospective and under-explored tenure located between the Jundee and Bronzewing mines in the
northern Yandal Greenstone Belt. Yandal has an established Resource of 268,000oz of gold at Flushing
Meadows (within IBW) and considers there to be strong potential to make new discoveries and expand
this resource base within its extensive tenure holding. (Refer to the ASX announcement of 4 November
2020 for details of the Flushing Meadows Resource).
The IWB project area also includes two new gold discoveries, the Arrakis and Siona Prospects, both made
within the last two years. These outcomes were driven by the execution of a targeted exploration
program that followed a systematic, geologically driven strategy that was developed in early 2023. The
Arrakis Prospect is hosted within the Caladan fold, and the Siona Prospect is hosted within the New
England Granite.
Both discoveries are currently at an early stage but progressing well, with future activities focused on
delineating the scale of each of the newly defined mineralised systems.
The IWB Gold Project also includes several advanced prospects, where limited historic and YRL drilling has
returned robust gold intercepts, indicating the potential for shallow oxide mineralisation. Both the early-
stage and more advanced prospects are the focus of ongoing exploration.
Mt McClure
The Mt McClure Gold Project, acquired in August 2022, is located ~15km southwest of the historic
Bronzewing Mine and includes three mining leases with JORC 2012 Resources totalling 182,200oz Au.
The project has prospectivity for new shallow gold deposits adjacent to current Resources and in the
footwall and hanging wall of the stratigraphy. Ground gravity survey data support ongoing
structural/stratigraphic interpretations for 2026 targeting.
yandalresources.com.au | ASX:YRL 9
Figure 4: Yandal Resources exploration Project locations within the Yandal
Greenstone Belt. The Arrakis Prospect is located within the Caladan target area.
King of the Hills
Thunder Box
Darlot
Bellevue
Kathleen Valley
Mt Keith
Wiluna
Jundee
Bronzewing
Wiluna
Leinster
New England Granite
Siona Discovery
Flushing Meadows
Deposit 268koz
Caladan Target area
Arrakis Discovery
0 100km
Ironstone Well-
Barwidgee Gold Project
Mt McClure Gold
Project 182koz
Dingo Range Project
yandalresources.com.au | ASX:YRL 10
Figure 5: Yandal Resources exploration target areas and prospect locations within the northern
Yandal Greenstone Belt. The Arrakis Prospect is located within the Caladan target area.
5km
Salusa
Caladan
Target Area
Siona
Flushing Meadows
(268Koz)
New England
Granite
Nayla Target
Area
Geidi Prime
Target Area
5km
Radius
Arrakis
Discovery
Irulan Dolerite
Complex
yandalresources.com.au | ASX:YRL 11
Table 1 – Yandal Resources Ltd - Mineral Resource Summary
Deposit
Indicated Inferred Total
Tonnes
(‘000s)
Grade
(g/t)
Au
(oz)
Tonnes
(‘000)
Grade
(g/t)
Au
(oz)
Tonnes
(000’s)
Grade
(g/t)
Au
(Oz)
Ironstone Well
Flushing Meadows1 2,141 1.3 91,000 5,245 1.1 177,000 7,386 1.1 268,000
Mt McClure
Challenger2 718 1.9 44,000 718 1.9 44,000
Success3 1,255 1.9 75,000 1,255 1.9 75,000
Parmelia4 252 2.1 17,000 252 2.1 17,000
HMS Sulphur5 1010 1.2 39,000 1010 1.2 39,000
Gilmore6 134 1.7 7,200 134 1.7 7,200
Sub-total - MMC 3,369 1.7 182,200 3,369 1.7 182,200
Grand-total7 2,141 1.3 91,000 8,614 1.3 359,200 10,755 1.3 450,200
Due to the effects of rounding, totals may not represent the sum of the individual components.
1. Reported above 0.5g/t Au lower cut-off grade; refer to Yandal Resources Ltd ASX announcement dated 4 November 2020 for full
details. 2. Reported above 1.0g/t Au lower cut-off grade; refer to Yandal Resources Ltd ASX announcement dated 22 August 2022 for
full details 3. Reported above 1.0g/t Au lower cut-off grade; refer to Yandal Resources Ltd ASX announcement dated 6 September
2022 for full details. 4. Reported above 1.0g/t Au lower cut-off grade; refer to Yandal Resources Ltd ASX announcement dated 20
September 2022 for full details. 5. Reported above 0.5g/t Au lower cut-off grade within this announcement 6. Reported above 1.0g/t
Au lower cut-off grade within this announcement. 7. All Resources are reported as global estimates, not constrained by optimised pit
shells.
Competent Person Statement
The information in this document related to Exploration Targets and Exploration Results, geology and data
compilation is based on information reviewed or compiled by Mr Christopher Oorschot, a Competent
Person who is a Member of The Australasian Institute of Geoscientists. Mr Oorschot is the Managing Director
of the Company, is a full-time employee and holds shares and options in the Company. Mr Oorschot has
sufficient experience, which is relevant to the style of mineralisation and type of deposit under
consideration, and to the activity which he is undertaking to qualify as a Competent Person as defined in
the 2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore
Reserves’. Mr Oorschot consents to the inclusion in this announcement of the matters based on this
information in the form and context in which it appears.
The information in this announcement that relates to the Flushing Meadows and Mt McClure Mineral
Resource Estimates is based on information compiled and generated by Andrew Bewsher, an employee
of BM Geological Services Pty Ltd (“BMGS”). Both Andrew Bewsher and BMGS hold shares in the company.
BMGS consents to the inclusion, form and context of the relevant information herein as derived from the
original resource reports. Mr Bewsher has sufficient experience relevant to the style of mineralisation and
type of deposit under consideration and to the activity which is being undertaken to qualify as a
Competent Person as defined in the 2012 Edition of the JORC ‘Australasian Code for Reporting of
Exploration Results, Mineral Resources and Ore Reserves’.
YRL confirms that it is not aware of any new information or data that materially affects the information
included in the original market announcement. The Company confirms that the form and context in which
the Competent Person’s findings are presented have not been materially modified from the original market
announcement.
yandalresources.com.au | ASX:YRL 12
Forward Looking Statements
This document may contain certain forward-looking statements. Forward-looking statements include, but
are not limited to, statements concerning Yandal Resources Limited’s (Yandal’s) current expectations,
estimates and projections about the industry in which Yandal operates, and beliefs and assumptions
regarding Yandal’s future performance. When used in this document, words such as “anticipate”, “could”,
“plan”, “estimate”, “expects”, “seeks”, “intends”, “may”, “potential”, “should”, and similar expressions are
forward-looking statements. Although Yandal believes that its expectations reflected in these forward-
looking statements are reasonable, such statements are subject to known and unknown risks, uncertainties
and other factors, some of which are beyond the control of Yandal, and no assurance can be given that
actual results will be consistent with these forward-looking statements. Drilling results presented indicate
geological potential for mineralisation, but there can be no certainty that these results will eventually form
part of a Mineral Resource Estimate.
Table 3 – Siona RC drilling program collar location summary. Please note that collars have not yet
been formally surveyed; the coordinates below are derived from a handheld GPS and are
accurate to within +/- 5m.
Hole ID
Hole
type
East
(m)
North
(m)
RL
(mAHD)
Azimuth
(degrees)
Dip
(degrees)
Total
Depth
(m)
26IWBRC007 RC 295630 7013568 501.9 -60 047 84
26IWBRC007 RC 295624 7013546 501.8 -60 047 114
26IWBRC007 RC 295659 7013552 502.2 -60 047 96
26IWBRC007 RC 295614 7013442 501.6 -60 270 150
26IWBRC008 RC 295634 7013457 501.6 -60 047 114
26IWBRC008 RC 295697 7013459 502.7 -60 047 120
26IWBRC008 RC 295692 7013438 502.4 -60 047 120
26IWBRC008 RC 295750 7013457 503.3 -60 047 78
26IWBRC008 RC 295723 7013436 503.1 -60 047 74
Table 4 – Siona - Summary of significant RC assay results >0.3g/t Au with no more than 4m of continuous
internal waste included unless otherwise stated. All intercept lengths are reported as down-hole lengths.
Hole
ID
Sample
type / Sub
Interval
From
(m)
To
(m)
Interval
(m)
Au
(g/t)
Comment
26IWBRC0072 1m RC 55 59 4 0.5 Completely weathered
26IWBRC0074 1m RC 45 58 13 1.5 Completely weathered
26IWBRC0074 Including 45 47 2 8.1 Completely weathered
26IWBRC0076 1m RC 48 63 15 0.5 Completely weathered
26IWBRC0078 1m RC 36 38 2 0.5 Completely weathered
26IWBRC0078 1m RC 43 45 2 0.8 Completely weathered
26IWBRC0078 1m RC 90 91 1 1.0 Moderately weathered
26IWBRC0080 1m RC 58 68 10 0.9 Completely weathered
26IWBRC0080 Including 67 68 1 3.7 Completely weathered
26IWBRC0080 1m RC 99 101 2 0.4 Fresh rock
26IWBRC0082 1m RC 37 38 1 3.3 Completely weathered
26IWBRC0084 1m RC 4 6 2 0.4 Transported Cover
yandalresources.com.au | ASX:YRL 13
Hole
ID
Sample
type / Sub
Interval
From
(m)
To
(m)
Interval
(m)
Au
(g/t)
Comment
26IWBRC0084 1m RC 37 54 17 1.3 Completely weathered
26IWBRC0084 Including 42 45 3 5.0 Completely weathered
26IWBRC0086 1m RC 36 46 10 0.9 Completely weathered
26IWBRC0086 Including 36 37 1 2.0 Completely weathered
26IWBRC0086 Including 40 42 2 3.2 Completely weathered
26IWBRC0086 1m RC 57 58 1 0.6 Moderately weathered
26IWBRC0088 1m RC 33 35 2 1.5 Completely weathered
26IWBRC0088 1m RC 51 60 9 0.3 Moderately weathered
26IWBRC0088 1m RC 65 73 8 0.3 Moderately weathered
ASX Announcement 13 July 2026 Page 14
Appendix 1 – Ironstone Well-Barwidgee Gold Project, Siona RC Drilling
JORC Code (2012) Table 1, Sections 1 and 2
Mr Christopher Oorschot, Managing Director of Yandal Resources, compiled the information in Section 1 and Section 2 of the following JORC Table 1 and
is the Competent Person for those sections. The following Table and Sections are provided to ensure compliance with the JORC Code (2012 edition)
requirements for the reporting of Exploration Results.
Section 1 Sampling Techniques and Data
Criteria JORC Code explanation Commentary
Sampling
techniques
Nature and quality of sampling (e.g. cut channels, random
chips, or specific specialised industry standard
measurement tools appropriate to the minerals under
investigation, such as down hole gamma sondes, or
handheld XRF instruments, etc.). These examples should
not be taken as limiting the broad meaning of sampling.
• Yandal Resources has completed RC (pre-collar) drilling across variably space lines covering
over approximately 500m of strike across the Siona Prospect. The drilling involved a 139mm
face-sampling bit down to depths between 74m and 150m. Holes were drilled at an angle of
-60 ° to the southwest or northeast.
• Yandal Resources (YRL) RC drilling samples were collected via a rig-mounted static cone
splitter, splitting approximately 12.5% of the total sample volume. Two splits are collected for
each metre: a primary and a duplicate sample. The primary 1m samples are then sent to a lab
for further analysis. The duplicate samples are retained on-site unless they are submitted as
routine duplicates.
Include reference to measures taken to ensure sample
representivity and the appropriate calibration of any
measurement tools or systems used.
• For YRL RC drilling, the cone splitter is regularly cleaned and inspected. The 1m bulk samples
are laid out in drill order. These bulk samples are regularly inspected for contamination, and
the volume of the bulk sample is monitored. These bulk samples are retained until all results are
received and may be used to collect additional field duplicates to verify lab results, logged
geology or any other form of analysis. If the bulk sample appears visually low in volume or
weight, this is recorded with the sample details. The same applies to damp or wet samples.
• Two splits are collected for each drilled metre: a primary and a secondary sample. The
Secondary sample is retained on-site and may be used to collect additional field duplicates
to verify lab results, logged geology or any other form of analysis.
Aspects of the determination of mineralisation that are
Material to the Public Report. In cases where ‘industry
standard’ work has been done this would be relatively
simple (e.g. ‘reverse circulation drilling was used to obtain
1 m samples from which 3 kg was pulverised to produce a
30 g charge for fire assay’). In other cases more
• RC drilling was used to obtain 1m samples from which a portion, between 1-5kg in weight, was
dispatched to Intertek Genalysis, Perth, Western Australia. At the lab, samples were crushed
and pulverised to produce a 50g charge for lead collection fire assay, with an Inductively
Coupled Plasma Optical (Atomic) Emission Spectrometry (ICPOES) finish for gold
determination, achieving a 0.005 ppm detection limit.
ASX Announcement 13 July 2026 Page 15
Criteria JORC Code explanation Commentary
explanation may be required, such as where there is
coarse gold that has inherent sampling problems. Unusual
commodities or mineralisation types (e.g. submarine
nodules) may warrant disclosure of detailed information.
Drilling
techniques
Drill type (e.g. core, reverse circulation, open-hole
hammer, rotary air blast, auger, Bangka, sonic, etc) and
details (e.g. core diameter, triple or standard tube, depth
of diamond tails, face-sampling bit or other type, whether
core is oriented and if so, by what method, etc).
• For YRL RC drilling, a 139mm diameter face sampling bit and hammer were used.
Drill sample
recovery
Method of recording and assessing core and chip sample
recoveries and results assessed.
Measures taken to maximise sample recovery and ensure
representative nature of the samples.
Whether a relationship exists between sample recovery
and grade and whether sample bias may have occurred
due to preferential loss/gain of fine/coarse material.
• For YRL holes, RC drilling recoveries are visually assessed by the supervising geologist, and any
low-volume or weight samples are recorded, along with any damp or wet samples. Drill depths
are routinely verified at the completion of each drill rod (every 6m). The cone splitter is checked
for each drill site to ensure it is completely upright and level. Sample collection from the splitter
by drilling off-siders is monitored for any inefficiencies.
• No relationship or bias between sample recovery and grade within the RC drilling results has
been observed.
Logging Whether core and chip samples have been geologically
and geotechnically logged to a level of detail to support
appropriate Mineral Resource estimation, mining studies
and metallurgical studies.
Whether logging is qualitative or quantitative in nature.
Core (or costean, channel, etc) photography.
The total length and percentage of the relevant
intersections logged.
• For YRL drilling, all RC holes have been logged in full by a qualified and experienced geologist.
RC chips and fines from each 1m interval drilled are inspected and logged for colour,
weathering, lithology, deformation, veining and sulphide species. All 1m samples are sieved
and retained in labelled and annotated chip trays. Chip trays are transported to Perth for long-
term storage and are available for review. The quality of logging information is considered
sufficient to support Mineral Resource Estimation studies.
• Data captured through geological logging by a geologist is qualitative in nature.
• In addition to geological logging, the magnetic susceptibility of each interval is measured
using a KT-10 magnetic susceptibility metre, with a sensitivity of 1x10-6 SI Units. Magnetic
susceptibility readings are quantitative in nature.
Sub-sampling
techniques
If core, whether cut or sawn and whether quarter, half or
all core taken.
• YRL RC drilling utilised a rig-mounted cone splitter installed directly below and in line with the
rig-mounted cyclone. Two 1-3kg sub-samples are collected into calico bags labelled with a
unique alpha-numeric ID. A majority of the samples collected were dry; if samples were damp
ASX Announcement 13 July 2026 Page 16
Criteria JORC Code explanation Commentary
and sample
preparation
If non-core, whether riffled, tube sampled, rotary split, etc
and whether sampled wet or dry.
For all sample types, the nature, quality and
appropriateness of the sample preparation technique.
Quality control procedures adopted for all sub-sampling
stages to maximise representivity of samples.
Measures taken to ensure that the sampling is
representative of the in situ material collected, including
for instance results for field duplicate/second-half
sampling.
Whether sample sizes are appropriate to the grain size of
the material being sampled.
or wet, this was noted in the sample records.
• For all YRL RC drilling, samples are dried at 100°C to constant mass, crushed to <10mm and
pulverised to nominally 85%, passing 75µm.
• For YRL RC drilling, field duplicates were collected at an initial rate of 1 duplicate for every 50
samples collected.
• Standards and blanks were routinely inserted into the sample sequence
• For labs used by YRL, internal lab quality control measures include lab duplicates and the
insertion of lab standards and blanks.
Quality of
assay data
and
laboratory
tests
The nature, quality and appropriateness of the assaying
and laboratory procedures used and whether the
technique is considered partial or total.
For geophysical tools, spectrometers, handheld XRF
instruments, etc, the parameters used in determining the
analysis including instrument make and model, reading
times, calibrations factors applied and their derivation,
etc.
Nature of quality control procedures adopted (e.g.
standards, blanks, duplicates, external laboratory checks)
and whether acceptable levels of accuracy (i.e. lack of
bias) and precision have been established.
• For YRL RC drilling, samples were assayed at Genalysis, Perth, Western Australia. At the lab,
samples are crushed and pulverised to produce a 50g charge for lead collection fire assay,
with an Inductively Coupled Plasma Optical (Atomic) Emission Spectrometry (ICPOES) finish for
gold determination, achieving a 0.005 ppm detection limit.
• Magnetic susceptibility measurements were taken every meter using a KT-10 V2 instrument with
a sensitivity of 1x10-6 SI Units.
• YRL QAQC field protocols include the insertion of commercially prepared certified reference
material (CRM) and blank material at a rate of approximately 1 CRM/blank for every 20
samples collected. CRMs used are unidentifiable by the lab when received. QAQC
performance is monitored upon receipt of each batch of results and re-assessed once all
samples for a program are received.
• Laboratory QA/QC protocols involve inserting internal lab standards using CRMs, blanks,
repeat analysis of pulps and screen tests (the percentage of pulverised material passing 75µm
mesh). Laboratory QAQC results are reported with each batch. Laboratory QA/QC
performance is monitored upon receipt of each batch of results and reassessed once all
samples for a program are received.
Verification
of sampling
and assaying
The verification of significant intersections by either
independent or alternative company personnel.
• Significant intercepts from YRL RC drilling are verified by YRL geologists through the visual
inspection of chips, reviewing the spatial location of mineralisation relative to previous
intercepts, and, in the case of high-grade gold intercepts, visually confirming gold in samples.
• No twinned holes have been completed across Arrakis.
ASX Announcement 13 July 2026 Page 17
Criteria JORC Code explanation Commentary
The use of twinned holes.
Documentation of primary data, data entry procedures,
data verification, data storage (physical and electronic)
protocols.
Discuss any adjustment to assay data.
• For YRL RC drilling, primary sampling and logging data are captured directly into the MX
Deposits application and uploaded directly to the cloud-hosted MX Deposit database.
• The first lab result for each sample is used for interrogating the data, and no adjustments have
been made to the data other than adjusting values below the detection limit to a null value
before review.
Location of
data points
Accuracy and quality of surveys used to locate drill holes
(collar and down-hole surveys), trenches, mine workings
and other locations used in Mineral Resource estimation.
Specification of the grid system used.
Quality and adequacy of topographic control.
• All drill collar locations were initially pegged a
Share your feedback
Discover